Kelford RB26DETT Camshafts R32 / R33 HIGH LIFT (Mech)
Kelford RB26DETT Camshafts R32 / R33 HIGH LIFT (Mech)
Couldn't load pickup availability
Upgrading a camshaft is a very technical and complicated subject. Here are a few different factors of a car’s performance that a Kelford Cams camshaft can improve and deliver:
• Increased engine torque
• Improved RPM performance
• Enhanced horsepower
• Better engine idle smoothness
• Higher engine speed performance
• Superior fuel efficiency
|
182-B |
260° high lift short duration cams. Best split between good throttle response and horsepower. Suits twin turbo upgrade or single 56mm-68mm turbo. OEM base circle diameter. Cylinder head requires machining for clearance of high lift cam lobes. Kelford Cams recommend valve spring KVS15 or KVS1855-BT. |
| 182-C | 272° high lift performance cams. More top end and maximum power than the 182-B. Suits twin turbo upgrade or single 64mm-76mm turbo. OEM base circle diameter. Cylinder head requires machining for clearance of high lift cam lobes. Kelford Cams recommend valve spring KVS15 or KVS1855-BT. |
| 182-S | 274°/270° split lobe high lift cams. Good balance between throttle response and high rpm power with a large turbo. Suits 62mm-72mm turbo. Great with E85. Ideal for well built engines with +1mm valves and ported head. Reduced base circle diameter. Cylinder head requires machining for clearance of high lift cam lobes. Kelford Cams recommend valve spring KVS1855-BT. |
| 182-SG |
292°/288° split lobe intake, 300° exhaust. High lift drag racing cams. To suit high boost alcohol drag engines running 80mm+ turbo. Ideal for well built engines with +1mm valves and ported head. Reduced base circle diameter. Cylinder head requires machining for clearance of high lift cam lobes. Kelford Cams recommend valve spring KVS1855-BT. |
| 182-SE |
274°/270° split lobe intake, 280° exhaust. High lift racing cams. Larger exhaust cam to suit 3.0L+ bottom ends. Suits 64mm+ turbo. Great with E85. Ideal for well built engines with +1mm valves and ported head. Reduced base circle diameter. Cylinder head requires machining for clearance of high lift cam lobes. Kelford Cams recommend valve spring KVS1855-BT. |
| 182-SF |
288°/280° split lobe intake, 292° exhaust. High lift racing cams. Best suited to wide open throttle racing applications where high rpm power is most important. Suits 68mm+ turbo. Fuel type E85 or methanol. Ideal for well built engines with +1mm valves and ported head. Reduced base circle diameter. Cylinder head requires machining for clearance of high lift cam lobes. Kelford Cams recommend valve spring KVS1855-BT. |
